FCOΞ Camera with 2.4GHz Transmitter and FCOΞ LinX 868 MHz receiver   FCOΞ receiver with screen of the  FCOΞ Core Set  FCOΞ V-Eyes   FCOΞ LinX 868 MHz hand-held transmitter   FCOΞ RX-Cable  (Pan, Tilt, release)

FCOΞ – the new FlyCamOne …beyond imagination!             The FCOΞ, the 3rd issue of the successful FlyCamOne series enables completely new possibilities. In the past you had to take your PC or laptop to watch your recorded videos. The FCOΞ Core Set already includes a 2” TFT screen, to save weight it can be separated from the camera. The screen’s place can be taken by the FCOΞ video-transmitter (part of the FCOΞ Transmitter Set) or by the mounting base to fix the cam to a model plane or. Equipped with the FCOΞ transmitter the camera transmits the video to a 2.4 GHz receiver that has to be connected with the FCOΞ screen. The camera´s head is able to pan and tilt and can be controlled by the “O” of the FCOΞ Logo or optionally through a transmitter by using the external FCOΞ RX cable. Therefore up to 3 free channels (pan / tilt / trigger) are required, but can be used with just two channels for pan and tilt as well. Already known modes from the former FlyCamOne like video recording, serial photos, still photo and others are part of the menu. The receiver module can also be connected to the soon available FCOΞ V-Eyes. Like that you can see the world from the birds view (FPV) as a live stream. The simultaneous recording onto a Micro SD card guarantees excellent video recordings, even if the picture at the ground is harmed by interferences. With the integrated Head-Tracking-System inside the FCOΞ V-Eyes, the cam's head follows the movements of the pilots head, necessary for that are three free channels (pan/ tilt/ trigger). Last but not least a 868 MHz transmitter /-receiver (FCOΞ LinX) will be available. Like that it´s also possible to move the cams head and trigger the recording without the model’s transmitter. Data like speed, high and direction will be supplied by GPS-module which will be available later on.  Release dates: FCOΞ Core Set (Cam+Screen) available FCOΞ 2.4 GHz Transmission Set available FCOΞ RX Cable available FCOΞ LinX 868MHz (hand-held transmitter) End of October FCOΞ V-eyes (Goggles) November Technical Data Camera modul* Size Weight Battery LCD Resolution FPS Head movement Motion detection Memory connector Screen modul* Typ, dimension Size Battery Transmitter modul** Size Weight Battery Frequenzy Power Receiver modul** Size Battery Frequenzy Video Out FCOΞ V-Eyes Videobrille Signal input Resolution Diagonal Size Active Area Color Configuration Angle of View Virtual image size Eye relief Exit pupil diameter Interpupillary distance Video signal input Stereo earphone Audio signal input Working Temperatures Storage Temperatures Consumption FCOΞ LinX 868 MHz hand-held transmitter Frequency Range Battery Charge   FCOΞ RX Cable Pan, tilt and release Input 98x50x15mm 62g incl. mounting plate 500mAh Lipo battery & memory, Mode und Action VGA 28 2 Servos (Pan,Tilt), external by RX cable via Video Sensor Micro SD with min.4MB writing speed <= 8GB Overlay Data-IN for GPS-data and RX-cable TFT 2" (4:3) 60x50x20mm no 60x50x23mm 40g 550mAh Lipo 2.4GHz (4 Channels) 10mW 98x50x15mm 1000mAh Lipo 2.4GHz (4 Channels) A/V 3,5mm socket   AUTO NTSC/PAL video signal  640H×480V×RGB (922K) 0.44〞 (11mm) 9.0mm×6.77mm Vertical stripe 32 degrees diagonal 68 inches diagonal at 2M 20 mm 10mm 63.5mm 1Vpp/72Ω 0.1 Watts × 2 Ch 200mVrms/20KΩ 0℃-60 ℃ -20℃-80 ℃ 1 W   868 MHz up to 160m afield Integrated LiPo battery via Mini-USB > FCOΞ LinX receiver is to plug in the a 10Pin connector of the FCOΞ > You can connect it with the FCOΞ V-Eyes the integrated head tracking transmit the signal. 5-6V standard receiver > up to three free channels on a rc receiver are necessary > at least 2 if you release it manually before you start * Part of the Core Set, ** Part of the Transmitter Set